STC 120V DC-DC Open Frame PSU
DC-DC Power SupplyMade in TaiwanOpen Frame| Series | Model | Output | Input | Input Range | Reverse Polarity Protection |
|---|---|---|---|---|---|
| 120 | STC120200X | 200Watts | 120 VDC | 96-140 VDC | 150 VDC |
ENVIRONMENTAL CONDITIONS:
- Cooling: Nature convection with U bracket heatsink
- Operating Temperature: <0C ~ +70C
- Operating Humidity: 20%~85% RH. (Non condensing)
- Storage Temperature: -20C~+80C
- Storage Humidity: 10%~90% RH. (Non condensing)
- Operating Altitude: 10M Below Sea level and 3000M Above Sea level
DC INPUT CHARACTERISTICS:
- Input connector type 30A/ 300V UL Approved 3-Pin Terminal
- Input Current 10A @Full Load & Low Line
- Inrush Current Less than 10A Cold start @25C ambient
DC OUTPUT CHARACTERISTICS:
OVERALL PERFORMANCE:
- Efficiency 85% typical @120V DC Full Load
- Hold up time 16ms @ Full load & Normal input voltage
- Rise time
- Power Good Signal TTL Compatible signal, on delay 100~500ms, off delay 1ms min
- Short Circuit Protection (SCP) All output equipped with SCP (shutdown and latch off)
- Over Power Protection (OPP) Peak power protected to 130%+-10% of continuous rated power (shutdown and latch off)
- Over Voltage Protection (OVP) +120V
RELIABILITY:
- MTBF (Mean Time Between Failure): >50,000 hours @max. Load, 12V DC & 25C ambient
- Safety Standards: Meet UL60950 and TuV EN60950
- Safety Approved:
- EMI Compatibility (EMC) Standard: FCC Part 15 Class B, CISPER22 (EN55022) Class B (CE mark)
- Dielectric Withstand: Input to Output: 1500Vac for 1second
- Dielectric Withstand: Input to Frame ground: 1500Vac for 1second
- Leakage Current: <0.75mA @250Vac
Input & Output Device Connector Specific
- Connector type: 25A/300V UL Approved 8-Pin Terminal
Power chassis Dimension:
- 98(W) x 172(L) x 40(H) mm
Net Weight:
- <0.8 kgm
Gross Weight:
- 1.5kgm